Jabbar K. Jabbar Gattmah

last Update:16-12-2021

Assoc. Prof. Dr. Jabbar GATTMAH received all his degrees in mechanical engineering. The major experience in field of material forming during the designing and manufacturing the dies and tools. Other experiences are Manufacturing and Machining, Engineering Elasticity and Plasticity, Production Engineering, Techniques of Residual Stresses Measurement, and Computer Aided Design as well as Finite Element Analysis and Simulation using various software

website for Dr.Jabbar K. Jabbar Gattmah

Email Address :jabbar_gutma_eng@uodiyala.edu.iq

Email address for Assistant Dean for Academic and Student Affairs:assis.dean.sci.eng@uodiyala.edu.iq

 

 Subjects:1  2  3  4  5  6  7  8   10

Mechanic :1  2  3  4  5  6  7  8  9  10


 

Khalaf Nasralla, Suha K. Shihab , Adel K. Mahmoud, Jabbar Gattmah " Estimation of Induced Residual Stresses and Corrosion behavior of Machined 718 Superalloy: 3D-FE Simulation and Optimization, International Journal of Computational Materials Science and Engineering, (2021)

Jabbar Gattmah, Suha K. Shihab, Muzher Taha Mohamed, Ali Laftah Abbas "Effect of Increasing Mass scaling in 3D Explicit Finite Element Analysis on the Wire Drawing Process" IOP Conference Series: Materials Science and Engineering, 1076, 012072 (2021).  

Fıras H, Hameed, Muzher T. Mohamed, Sami A. Nawi, Jabbar Gattmah " Dissimlar Arc Stud Welding AISI 304/AISI 1008: Mechanical Properties" IOP  Conference Series: Materials Science and Engineering, 1076,  012079 (2021). 

▪ Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan "A new development of measurement technique for residual stresses generated by the cold tube drawing process with a fixed mandrel" The International Journal of Advanced Manufacturing Technology volume 108, pages 3675–3687(2020).

▪ Suha K Shihab, Jabbar Gattmah, Hala M Kadhim"Experimental Investigation of Surface Integrity and Multi-Objective Optimization of End Milling for Hybrid Al7075 Matrix Composites" Silicon (2020). 

▪ Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan "Numerical Simulation of Bending Process for Steel Plate Using Finite Element Analysis" Arabian Journal for Science and Engineering, volume 44, pages 10285–10292 (2019). 

▪ Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan "ANALYSIS OF COLD ROLLING PROCESS WITH DIFFERENT PARAMETERS USING FINITE ELEMENT METHOD" 1st International Conference on Advances in Mechanical and Mechatronics Engineering, 354-360 (2018).

▪ Jabbar Gattmah, Muzher Taha Mohamed, Suha K. Shihab "SHEET METAL FORMING PROCESSES FOR VARIOUS MATERIALS USING FINITE ELEMENT ANALYSIS" 1st International Conference on Advances in Mechanical and Mechatronics Engineering, 369-376 (2018).

▪ Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan "Experimental and finite element analysis of residual stresses in cold tube drawing process with a fixed mandrel for AISI 1010 steel tube" The International Journal of Advanced Manufacturing Technology, volume 93, pages 1229–1241 (2017).

▪ Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan "Effects of Process Parameters on Hot Extrusion of Hollow Tube" Arabian Journal for Science and Engineering, volume 42, pages 2021–2030 (2017). 

▪ Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan "Effect of the process parameters on cold tube drawing with a fixed plug using finite element analysis for AISI 1010 steel" SAKARYA UNIVERSITY JOURNAL OF SCIENCE, Volume 21, Pages 886~892 (2017).

▪ Jabbar Gattmah, Fahrettin Ozturk, Sadettin Orhan "Effects of the semi die/plug angles on cold tube drawing with a fixed plug by FEM for AISI 1010 steel tube" 4th International Symposium on Innovative Technologies in Engineering and Science, Turkey, Pages 1065-1074 (2017).

▪ Jabbar GATTMAH, Murat Tolga OZKAN, Ihsan TOKTAS, Eylul DEMIR "Comparison with different models of bending stress analysis of the cantilever beams under different profile section" materials and loads, Social GAU Journal & Applied Sciences, Volume 7, Pages 173-182 (2015).

▪ Eylul DEMIR, Ihsan TOKTAS, Murat Tolga OZKAN, Jabbar GATTMAH "Comparison with different models of tensile and compressive stress analysis on a cantilever beam model" materials and loads, Social GAU Journal & Applied Sciences, Volume 7, Pages 183-194 (2015). 

▪ Jabbar Kasim Jabbar Gattmah "CALCULATION OF RELATIVE EXTRUSION PRESSURE FOR CIRCULAR SECTION BY LOCAL COORDINATES SYSTEM BY USING FINITE ELEMENT METHOD F.E.M" Diyala Journal of Engineering Sciences, Volume 3, Pages 80-96 (2010).

▪ Jabbar kasim Jabbar Gattmah, Suha Karim Shihab "USING TECHNIQUE OF CONTACT ELEMENT FOR WIRE DRAWING BY USING FINITE ELEMENT METHOD" International Engineering Convention (2009).

▪ Saad Theyyab Faris, Jabbar Kasim Jabbar Gattmah "ROTATION OF LOCAL COORDINATE FOR ANALYSIS DRAWING PPROCESS OF METAL POLYGONAL SECTION BY (FEM)" Diyala Journal of Engineering Sciences, Volume 1, Pages 139-151 (2008).

 

 

3:45