SUHA K. SHIHAB

SUHA K. SHIHAB is a Lecturer in the Department of Material Engineering, Engineering College, Diyala University, Diyala, Iraq. She has more than 17 years of teaching and research experience. Her major research interest includes production engineering, manufacturing Engineering, Machining, Manufacturing Process Optimization, Design of Experiment (DOE) in products and processes, and Finite Element Analysis Program (ANSYS). She has published more than 30 research papers in the refereed international/national journals and conferences. She received B. Sc. in Production Engineering and Metallurgy from University of Technology, Baghdad, Iraq (1997). She received M. Sc. in Production Engineering from University of Technology, Baghdad, Iraq (2005). She also received her Ph.D. in Production Engineering/ Manufacturing and Machining Processes from Jamia Millia Islamia in New Delhi, India (2015).


 

Timetable:

day

subject

stage

Time

Sunday

Materials inspection

Third

8:30 - 11:30

Monday

Materials Manufacturing

Fourth

10:30 - 11:30

Monday

Project

Fourth

12:30 - 2:30

Thursday

Materials inspection lab

Third

1:30 - 2:30

 

 

 


 

Lectures:

Lectures first course

Title of Lecture

Fourth class

Lectures one

Introduction and Overview of Manufacturing

Lectures two

Casting Processes, patterns and molds

Lectures three

Casting methods

Lectures four

Sand casting

Lectures five

Die casting

Lectures six

Centrifugal casting

Lectures seven

Casting Defects 

Lectures eight

Powder metallurgy

Lectures nine

Machining Processes

Lecture ten

Tool geometrical shapes

Lecture eleven

Cutting tools materials

Lecture twelve

Variables cutting effect

Lecture thirteen

Cutting theory

Lecture fourteen

Turning

 

Lecture fifteen

Milling

 

Lecture sixteen

Drilling

 

Lecture seventeen

Grinding

 

Lecture eighteen

Polishing

 

References

  1. Manufacturing Science   , Ghosh and Mallik
  2. Fundamentals of Modern Manufacturing, Mikell P. Groover
  3. Processes and Materials of Manufacturing, ROY A. LINDBERG

 

Lectures

Title of Lecture

Third class

Lectures one

Introduction about Materials inspection

Lectures two

Tensile Test

Lectures three

compression Test

Lectures four

Torsion Test

Lectures five

Hardness Test

Lectures six

Bending Test

Lectures seven

Impact Test

Lectures eight

Creep Test

Lectures nine

Fatigue Test

Lectures ten

  Visual Test

Lectures eleven

Liquid Penetration Test

Lectures twelve

Magnetic Particle Test

 

Lectures thirteen

Ultrasonic Test

 

Lectures fourteen

Radiography Test

 

Lectures fifteen

Eddy Current Test

 

References

 

 

 

 

 


 

Publications:

 

 

S.K. ShihabExploring the Effect of Dimensional Tolerance of the Inserts During Multi-Objective Optimization of Face Hard Milling Using Genetic Algorithm, Engineering and Technology Journal, Vol. 35, Part A. No. 4, 2017
Shagufta, Suha K. Shihab, Zahid A. Khan, Arshad Noor Siddiqueed,Nidhi Sharma, Optimization of Wire Electrical Discharge Machining Process Parameters Using Genetics Algorithm, International Journal of Scientific & Engineering Research, Volume 8, Issue 7, July-2017.
P.V.Suresh Babu, Anil Kumar, Suha K. Shihab, Arshad Noor Siddiquee, An investigation on Effects of End Milling process on Noise during Machining of Copper, International Journal of Scientific & Engineering Research, Volume 8, Issue 7, July-2017
Md Kashif Reza, Suha Karim Shihab , Noor Zaman Khan, Mohd Atif Wahid, Investigation on The Effect of Drilling Process Parameters on Surface Roughness, International Journal of Scientific & Engineering Research, Volume 8, Issue 7, July-2017
Md Nasimuddin, Noor Zaman Khan, Suha K. Shihab, Arshad Noor Siddiquee, Optimization Of Turning Parameters Using Taguchi Method, International Journal of Scientific & Engineering Research, Volume 8, Issue 7, July-2017.
Fayaz Ahmad Mira, Zahid A. Khanb, Arshad Noor Siddiqueeb, Suha K. Shihab, Investigations on the Effect of Radius Milling Process Parameters on Surface Roughness, International Journal of Scientific & Engineering Research, Volume 8, Issue 7, July-2017

Suha K. Shihab, Zahid A. Khan, Arshad Noor Siddiquee, Application of Grey Relational Analysis Along with Principal Component Analysis for Multi-Response Optimization of Hard Turning, International Journal of Engineering Trends and Technology (IJETT), 38 (5), pp. 238-245, August 2016.

Suha K. Shihab, Ethar Mohamed Mahdi Mubarak, Evaluation of Surface Roughness and Material Removal Rate in End Milling of Complex Shape,  Universal Journal of Mechanical Engineering 4(3): 69-73, 1st July, 2016

Suha K. Shihab, Zahid A. Khan, Arshad Noor Siddiquee, Analysis of chip morphology in dry hard turning of AISI 52100 alloy steel using RSM, International Journal Machining and Machinability of Materials, 17(6), pp. 481–506, 2015

Suha K. Shihab, Zahid A. Khan, Arshad Noor Siddiquee, Noor Zaman Khan,  A Novel Approach to Enhance Performance of Multilayer Coated Carbide Insert in Hard Turning, Archive of Mechanical Engineering, VOL. LXII,  No. 4, pp. 539-552, 2015.

Noor Zaman Khan, Arshad Noor Siddiquee, Zahid A. Khan, Suha K. Shihab, Investigations on tunneling and kissing bond defects in FSW joints for dissimilar aluminum alloys, Journal of Alloys and Compounds, Vol.648, pp.360-367, 2015.

Suha K. Shihab, Arindam Kumar Chanda, Multi Response Optimization of Milling Process Parameters Using MOORA Method, International Journal of Mechanical And Production Engineering, ISSN: 2320-2092, Volume- 3, Issue-4, April-2015.

Suha K. Shihab, Zahid A. Khan and Arshad Noor Siddiquee, RSM Based Investigations on the Effects of Cutting Parameters on Surface Integrity during Cryogenic Hard Turning of AISI 52100, Journal of Manufacturing Science and Production, DOI 10.1515/jmsp-2015-0009, pp.1-10, 2015.

Suha K. Shihab, Zahid A. Khan and Arshad Noor Siddiquee, Investigation on the effect of machining parameters on the corner radious in pocket milling, Global Sci-Tech,7 (4), pp. 1-7, October-December 2015.

Noor Zaman Khan, Suha K. Shihab, Nidhi Sharma, Atif Wahid, Arshad Noor Siddiquee, Zahid A. Khan, Investigation on the effect of WEDM process parameters on surface roughness, Global Sci-Tech, Vol.7, No.1, pp. 1-9, January- March 2015.

Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, A Review of Turning of Hard Steels Used in Bearing and Automotive Applications, International Journal of Production & Manufacturing Research, Vol. 2, No. 1, pp.24-49, 2014.

Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, RSM based study of cutting temperature during Hard Turning with Multilayer Coated Carbide Insert, Procedia Materials Science, Vol.6, pp.1233 -1242, 2014

Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, Cryogenic hard turning of alloy steel with multilayer hard surface coatings (TiN/TiCN/Al2O3/TiN) insert using RSM,  International Journal of Current Engineering and Technology, Special Issue-2, E-ISSN 2277 – 4106, P-ISSN 2347 – 5161, February 2014.

 Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, Investigations on the effect of CNC dry hard turning process parameters on surface integrity: a multi-performance characteristics optimization, Int. J. Manuf. Sci. Prod (IJMSP), DOI 10.1515/jmsp-2013-0019, 2014.

 Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, Optimization of Surface Integrity in Dry Hard Turning Using RSM, Sadhana, Vol. 39, Part 5, pp. 1035-1053, October 2014.

 Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, Investigation of Surface Integrity during Wet Turning of Hard Alloy Steel, Int. J. Machining and Machinability of Materials, Vol. 16, No. 1, pp.22-37, 2014.

 Suha K. Shihab, Zahid A . Khan, Aas mohammad, Arshad Noor Siddiquee, Effect of Cryogenic Cooling on Surface Integrity in Turning of Hard Alloy Steel, Indian Journal of Applied Research, Volume 3, Issue 7, ISSN - 2249-555X, pp. 3-7, July 2013.

 Suha K. Shihab, Zahid A. Khan, Aas mohammad, Arshad Noor Siddiquee, Effect of Cutting Parameters on Cutting Forces and MRR During Turning Hard Alloy Steel With and Without Coolant, International Journal of Engineering and Advanced Technology (IJEAT), ISSN: 2249- 8958, Volume-3, Issue-1, pp.14-30, October 2013.

 Suha K. Shihab, Zahid A. Khan, Aas mohammad, Arshad Noor Siddiquee, Application of Response Surface Methodology for Determining Cutting Forces in Hard Turning Using Castrol Coolant, Advanced Materials Manufacturing & Characterization, Vol. 3 Issue 1, pp.27-36, 2013.

 Saad Theeyab Faris, Suha Karim Shihab, Study and Design the Hydrodynamic Deep Drawing Process for Blanks of Non Uniform Thickness, Diyala Journal of Engineering Sciences, pp. 40-56, 22-23 Dec. 2010.

 Suha K. Shihab, Finite Element Analysis of The Influence of Edge Roundness on The Stresses and  Cutting Forces for Ceramic Cutting Tools, Diyala Journal of Engineering Sciences, Vol. 02 , No.1, pp. 1-12 , June 2009

 Suha K. Shihab, Ethar M. Mubarak, Study of the Ceramic Cutting Tool Performance Using Double Rake Face, Diyala Journal of Engineering Sciences, Vol. 01, No. 01, pp. 1-18, 2008.

 Maan Aabid Tawfiq, Suha Kareem Shihab, A Finite Element Analysis of Orthogonal Machining UsingDifferent Tool Edge Geometries, Eng. & Technology, Vol.25, No.4, pp.569-583, 2007.

 Suha K. Shihab, Study the Effect of Depth of Cut on the Cutting Tool by Using Finite Element Method, Diyala Journal for Applied Research (DJAR),Vol.3, No.2, 2007.

Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, The Effect of Cutting Parameters on Surface Integrity during Hard Turning Using Castrol Coolant, World Academy of Science, Engineering and Technology, Istanbul, Issue78, pp. 1703-1709, June 2013.

Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, Analysis of cutting forces and material removal rate in dry hard turning using response surface methodology, International Conference on Automation and Mechanical Systems, Faridabad, 21-22, pp.175-187, March 2013.

Jabbar Kasim Jabbar and Suha Karim Shihab, Using Technique of Contact Element for Wire Drawing by Using Finite Element Method, International Engineering Convention, Damascus, Syria, 11-14 May 2009.

 
 
 

 

Copyright © 2016 All rights reserved
3:45